How listen and connect a GR64 modem (as a server) to a caller IP address ?

**Iphone** · 29-Mar-2007, 12:45 AM

What are the steps to be followed to provide a connection after the IP listen command AT*E2IPL=1,1,80,0,1? I have a Sony-Ericsson GR64 R2A GSM/GPRS modem module. This command opens a socket, binds it to a local IP address and puts the socket in state to listen for incoming connections on the port number specified on the command (port 80). I am calling the MT in Hyperterminal run on PC. Hyperterminal prompt "connect now". But MT can not send any result code in serial port or any signal on I/O pins. How can I detect an incoming call to connect through the command AT*E2IPACT=1 in MT? ..Or how can I provide an automatic connection? Thanks.

**Iphone** · 29-Mar-2007, 12:45 AM

Dear have a look at the following link

http://www.matrix.es/docs/GX64%20AT%20Command%20Manual%20P1B%20(P1A072).pdf

p145 might be of interest

p130-140 are also of interest.

please let is know if you need any further assistance.

29-Mar-2007, 12:45 AM	#1 (permalink)
Iphone Fixed Error! Posts: 4,202 Join Date: Mar 2007 Rep Power: 6 IM:	How listen and connect a GR64 modem (as a server) to a caller IP address ? What are the steps to be followed to provide a connection after the IP listen command ATE2IPL=1,1,80,0,1? I have a Sony-Ericsson GR64 R2A GSM/GPRS modem module. This command opens a socket, binds it to a local IP address and puts the socket in state to listen for incoming connections on the port number specified on the command (port 80). I am calling the MT in Hyperterminal run on PC. Hyperterminal prompt "connect now". But MT can not send any result code in serial port or any signal on I/O pins. How can I detect an incoming call to connect through the command ATE2IPACT=1 in MT? ..Or how can I provide an automatic connection? Thanks.

29-Mar-2007, 12:45 AM	#2 (permalink)
Iphone Fixed Error! Posts: 4,202 Join Date: Mar 2007 Rep Power: 6 IM:	Re: How listen and connect a GR64 modem (as a server) to a caller IP address ? Dear have a look at the following link http://www.matrix.es/docs/GX64%20AT%20Command%20Manual%20P1B%20(P1A072).pdf p145 might be of interest p130-140 are also of interest. please let is know if you need any further assistance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)