![]() |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
![]() |

|
| Networking Error ! Networking Errors and Queries |
![]() |
|
VPN client cannot access inside network resources.
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Fixed Error!
Posts: 1,497
Join Date: Mar 2007
Rep Power: 3
IM:
|
Here's a copy of the current running config tchpix506e# show run : Saved : PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname tchpix506e fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol ils 389 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names pager lines 24 mtu outside 1500 mtu inside 1500 ip address outside xxx.xxx.xxx.35 255.255.255.0 ip address inside 192.168.1.254 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool vpnpool1 192.168.1.1-192.168.1.253 ip local pool vpnpool2 192.168.2.1-192.168.2.10 pdm history enable arp timeout 14400 route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.1 1 route inside 192.168.2.0 255.255.255.0 128.2.0.114 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server LOCAL protocol local no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set trmset1 esp-aes-256 esp-sha-hmac crypto dynamic-map map2 10 set transform-set trmset1 crypto map map1 10 ipsec-isakmp dynamic map2 crypto map map1 interface outside isakmp enable outside isakmp identity address isakmp policy 10 authentication pre-share isakmp policy 10 encryption aes-256 isakmp policy 10 hash sha isakmp policy 10 group 2 isakmp policy 10 lifetime 86400 vpngroup tch address-pool vpnpool1 vpngroup tch idle-time 1800 vpngroup tch password ******** vpngroup pim address-pool vpnpool2 vpngroup pim idle-time 1800 vpngroup pim password ******** telnet timeout 5 console timeout 0 terminal width 80 Cryptochecksum:0000000000000000000000000 : end tchpix506e# exit |
|
|
|
|
|
|
|
|
#2 (permalink) |
|
Fixed Error!
Posts: 1,497
Join Date: Mar 2007
Rep Power: 3
IM:
|
>>access-list 102 permit ip 128.2.0.0 255.255.0.0 192.168.1.0 255.255.255.0 needs to have this as well; access-list 102 permit ip 128.2.0.0 255.255.0.0 192.168.2.0 255.255.255.0 this isn't required >>access-list 102 permit ip 128.2.0.0 255.255.0.0 128.2.0.0 255.255.0.0 After doing them, try to connect using the group 'pim' and see if you can ping the inside ip address (Not by names yet since you aren't giving the dns servers to the vpn clients). See if that works, if not post back. I'm going to catch some sleep now, will look at it tomorrow morning my time :-) |
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|