ps3cheats

I have a question regarding seting up a natted vpn between 2 cisco PIX

first some background

1. location A has a cisco pix - from location A there exists 3 separate vpn tunnels top locations X Y Z, this all works fine

2. Locations D and E need access to resources on locations X Y Z, howvever they must go through location A, we cannot get ne tunnels to location X Y Z


3. bottom line, I need to create 2 new tunnels from locations D and E to location A, by itself i think i can do that. however the issue i have is that locations D and E need access to X Y Z, and when accessing it must appear as if they are coming from A, as that is the only site that has the permission

some type of nating has to happen from the traffic coming from d and E so that when they try to access X Y Z, it appears as if they have ips from A


does anybody have ideas, is this possible....

ps3cheats

No can do on 501. Sorry. It is capped at 6.3(5) as the latest it will run. 501 and 506 will never be able to run 7.x code. They are being killed off and replaced with the new, agressively priced, ASA5505
Looks like Remote Desktop/Terminal server is your best bet at this point if you don't want to buy the ASA
Depending on your license on the 501 you may also be capped at 4 simultaneous VPN tunnels.