Anilrgowda

Unable to start Routing and Remote Access Service under Windows 2003 SBS

Source: IPMGM
Event ID: 50022
Description:
Failed to register with RTM. The error code is in the data

Source: RemoteAccess
Event ID: 20103
Description:
Unable to load c:\WINDOWS\System32\iprtrmgr.dll.

Source: Service Control Manager
Event ID: 7024
Description:
The Routing and Remote Access Service terminated with service-specific error 1450 (0x5AA)

I've recently put in a DMZ between the server and the internet and had a two NIC RRAS solution. I changed the external NIC to a fixed IP address, and tried to run CEICW but this failed on the firewall configuration.

The DMZ is in place to allow staff on a joint venture to access the internet with affecting our server, so used Two NIC's for this purpose.

Could this be a DNS issue as I've had problems with the DNS where client queries were showing the incorrect IP address.

I've got two network cards,

Internal NIC with 192.168.0.1
Wins: 192.168.0.1
DNS: 192.168.0.1
no gateway on internal
Net Bios configured

External NIC to router with 172.16.0.10
DNS: 192.168.0.1
Gateway setup to: 172.16.0.1 (which is the router 'Dlink DI-524')
No WINS
No Netbios

This problem is preventing users accessing the internet, and is getting urgent.

Anilrgowda

Assume you have it from the SP CD?
Quite straightforward but follow the instructions - don't guess......

http://download.microsoft.com/download/4/0/8/40860507-c351-4308-a876-e1b83ee4e77a/isainstallsteps.htm