ps3cheats

I configured the ASA to inspect PPTP and according to my ASA book, that's all I needed to do, however it isn't working. A contractor that starts work here in January connects to his company via a PPTP VPN tunnel. I recently upgraded the ASA to PIX version 7.2(2).

ps3cheats

Try a policy
Text below is cut/paste from this document:
http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_2/cmd_ref/i2_711.htm#wp1666537

"
You enable the PPTP inspection engine as shown in the following example, which creates a class map to match PPTP traffic on the default port (1723). The service policy is then applied to the outside interface.

hostname(config)# class-map pptp-port
hostname(config-cmap)# match port tcp eq 1723
hostname(config-cmap)# exit
hostname(config)# policy-map pptp_policy
hostname(config-pmap)# class pptp-port
hostname(config-pmap-c)# inspect pptp
hostname(config-pmap-c)# exit
hostname(config)# service-policy pptp_policy interface outside