ps3cheats

I have a Cisco PIX 506 and I cannot get FTP to work. I have added fixup protocols for FTP but to no avail. The only way that it will work is by using a app like Filezilla and selecting passive mode. We have a few applications that have FTP built in and these do not work. Here is the config of the PIX:

PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password k4HlcGX2lC1ypFOm encrypted
passwd y5Nu/Nt1/5dK8Iuf encrypted
hostname xxxx
clock timezone EST -5
clock summer-time ESD recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 20
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol htt
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
no fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list permit-in permit icmp any any echo
access-list permit-in permit icmp any any echo-reply
access-list permit-in permit ip host 192.168.x.x 192.168.x.0 255.255.255.0
access-list permit-in permit ip host 192.168.x.x 192.168.x.0 255.255.255.0
access-list permit-in permit ip host 192.168.x.x 192.168.x.0
access-list permit-in permit ip host 192.168.x.xx 192.168.x.0 255.255.255.0
access-list permit-in permit ip host 192.168.x.x 192.168.x.0 255.255.255.0
access-list permit-in permit ip host 192.168.x.xx 192.168.x.0 255.255.255.0
access-list permit-in permit ip host 192.168.x.xx 192.168.x.0 255.255.255.0
access-list permit-in permit ip host 192.168.x.xx 192.168.x.0 255.255.255.0
access-list permit-in permit ip host 192.168.x.xx 192.168.x.0 255.255.255.0
access-list permit-in permit ip host 192.168.x.xx 192.168.x
access-list permit-in permit ip host 192.168.x.x 192.168.x.0 255.255.255.0
pager lines 24
logging console debugging
logging monitor debugging
logging buffered debugging
mtu outside 1500
mtu inside 1500
ip address outside 192.168.xx.x 255.255.255.252
ip address inside 192.168.x.x 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 192.168.x.xxx
nat (inside) 1 172.16.32.0 255.255.255.0 0 0
nat (inside) 1 172.16.35.
nat (inside) 1 172.16.36.0 255.255.255.0 0 0
nat (inside) 0 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 192.168.5.xx 192.168.5.xx netmask 255.255.255.255 0 0
access-group permit-in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.15.1 1
route inside 172.16.32.0 255.255.255.0 192.168.x.xxx 1
route inside 172.16.35.0 255.255.255.0 192.168.x.xxx 1
route inside 172.16.36.0 255.255.255.0 192.168.x.xxx 1
route inside 172.16.37.0 255.255.255.0 192.168.x.xxx 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 192.168.5.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:2c7f83484d5da5bec73522275a3c1bdf

Any help would be great. Thanks.